Sign In | Join Free | My
Shenzhen Techone Tech Co.,Ltd
Power a Smart Arcing
Home > Electric Vehicle Charging Station >

Strength Resistance 3000W On-board DC / DC Converter 200 - 750Vdc For Electric Vehicles

Shenzhen Techone Tech Co.,Ltd
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Shenzhen Techone Tech Co.,Ltd
City: Shenzhen
Province/State: Guangdong
Country/Region: China
Tel: 86-755-83438287
Contact Person:
Miss Vivian

Strength Resistance 3000W On-board DC / DC Converter 200 - 750Vdc For Electric Vehicles

Brand Name : Goldpower
Model Number : GPEV-DD302M-H-N-1A
Certification : UL/CE/ROHS/FCC/SGS
Place of Origin : China
MOQ : 200pcs
Price : negotiation
Payment Terms : T/T
Supply Ability : 30,000pcs per month
Delivery Time : 40 working days on payment
Packaging Details : 1 unit in 1 colorful box, 6 boxes in one master carton
Application : Electric vehicle
Input range : 200-750Vdc
Output range : 3000W(Max3600W)
Ventilation : Systems integration cooling
Dimensions : 316mm*211mm*84mm
Contact Now

200~750Vdc 3000W onboard DC/DC Converter for Electric Vehicles


1.1 Environmental

Working temperature-40+85°CAuto derating, T≥ 85°C
Storage temperature-40+105°C
CoolingSystems integration cooling
Water/dust proof levelIP00

1.2 Input

Input voltage range200750Vdc
Rated voltage range540VdcWith input reverse protection
Max voltage14A250Vdc input, full load
Static current loss12mA

1.3 Output

Rated voltage27VdcRated input, output half load
Rated output voltage27±0.3Vdc
Current range0110VdcInput voltage <250V, output current derating. (110A/250V-55A/200V)
Max current110AMax working current for long time operation
Rated power3000W
Output peak power3600W
Temperature Coefficient±0.02%/°C
Noise and ripple300mVp-pOscilloscope bandwidth of 20 MHZ, 10 u + 104 cap paralleled with a probe
Time of start-up3S
Output rising time300ms
Voltage stability±1
Load regulation±1
Static current loss1mAWithout connecting high voltage and 24 VDC, output connecting with 24VDC battery leak current.
Control methodCAN or EN
Dynamic response of voltage overshoot±3%0%~70%~0% or 50%~120%~50% load change, Load mutation rate≤0.1A/us, load dynamic frequency 50Hz-5KHz.
Capacitive load450045000uFOrdinary aluminum electrolytic capacitor
Continued input on/offSupporting continuous input on/off. Under the condition of given control signal and normal output, able to endure 5x continued on/off within 1min, no malfunction or damage to the power supply.

1.4 Protection against

Input over-voltage760810Vdc
Over-voltage recovery750800Vdc
Input low-voltage170190Vdc
Low-voltage recovery180200Vdc
Output over-voltage3133VdcAuto recovery, output flow backwards 50Vdc without damage.
Output low-voltage18.019.0VdcAuto recovery
Over-current1. If input voltage >250V, output current 110~136A, the unit is able to continuously operate full load for 6min, and then current limiting point drops to 110A. 2. When Input voltage drops from 250V to 200V, output current limit also linearly drops from 110A to 55A.
Over temperatureT>85°C, output derates linearly. T>95°C, output shut down. T<80°C,output auto recovers.
Output short-circuitAuto recovery when fault removed
Input reversedNo damage if reversed
Input energizing sequencing
  1. High voltage before control signal 2. Control signal before high voltage. 3.High voltage and control signal at the same time. Power supply works normally, no protection triggered on damage caused.

1.5 EMC

ParameterStandard requirement
EMCGB_T 21437.2-2008 Positive limiting:50V Negative limiting;-50V Test port:(1)Input 24V,(2)Output 24V
CEGB_T 18655-2010 Level 3.Test port:(1)Input 24V,(2)Output 24V,(3)High voltage input
REGB_T 18387-2008 Level 3 with system testing
ESDGB/T 19951-2005 Whole machine(power on) contact discharge:±6KV,Air discharge:±8KV,criterion:B.Whole machine( not power on) contact discharge: Air discharge±6KV:±15KV criterion:C
Radiated electromagnetic field immunity free field methodGB/T 17619-1998 whole machine 100V/m criterion:A
BCIGB/T 17619-1998 high voltage input,24V input ,24V output 100mA,criterion: A
Conductive interference along lines (24V)GB_T 21437.2-2008(ISO 7637-2) Level 4, criterion:A
EFTGB_T626.4-2008(IEC61000-4-4) high voltage input:±4KV,5KHz/100KHz,+24V input ,+24 output ±2KV,5KHz/100KHz.,criterion:B
EMS remarks: based on output voltage and current stability.

1.6 Auxiliary

ParameterStandard requirement
Low temperature testGB/T 2423.1
High temperature testGB/T 2423.2
Vibration5.91Grms,32 h/axial(Normal connection and fixed wiring harness,ISO16750-3,2012(E)
Percussion test500m/ S2,half sine wave,6ms,ISO6750

1.7 Safety and insulation class

ParameterStandard requirementRemarks
Electrical strength resistance (Input /Output)2500VdcWithstand 2500Vdc for 1 minute, leakage current ≤1mA, no breakthrough or arcing.

Insulation resistance

(Input /Output)

≥20MΩInput to output, Input to case, applying 1000 VDC at 1 atm, RH 90%.
Charge discharge capacity≤36VIn ten minutes after DC/DC powered off

1.8 Mechanical


Product Tags:

ev charger station


electric car charger locations

China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

Strength Resistance 3000W On-board DC / DC Converter 200 - 750Vdc For Electric Vehicles Images

Inquiry Cart 0
Send your message to this supplier
Enter your email please.
To: Shenzhen Techone Tech Co.,Ltd
Characters Remaining: (0/3000)
Inquiry Cart 0